JB/T 6324-1992 KE型50A至500A 电焊机用晶闸管

作者:标准资料网 时间:2024-04-29 06:11:54   浏览:9758   来源:标准资料网
下载地址: 点击此处下载
基本信息
标准名称:KE型50A至500A 电焊机用晶闸管
中标分类: 电工 >> 输变电设备 >> 电力半导体期间、部件
发布部门:中华人民共和国机械工业部
发布日期:1992-06-26
实施日期:1993-01-01
首发日期:1900-01-01
作废日期:1900-01-01
提出单位:机械电子工业部西安电子电力技术研究所
归口单位:机械电子工业部西安电子电力技术研究所
起草单位:北京椿树整流器厂、机械电子工业部成都电焊机研究所
起草人:田文甫、林佑亭、郭兰琼、秦贤满
出版社:机械工业出版社
出版日期:1993-01-01
页数:8 页
适用范围

本标准规定了工频电阻焊机和电弧焊机的主电路用晶闸管的型式、尺寸、参数、检验和标志等技术要求。
本标准适用于电阻焊机和电弧焊机用按管壳额定的KE型50A反向阻断三级晶闸管(以下简称晶闸管)。

前言

没有内容

目录

没有内容

引用标准

没有内容

所属分类: 电工 输变电设备 电力半导体期间 部件
下载地址: 点击此处下载
Product Code:SAE AIR1407
Title:Prediction Procedure for Near-Field and Far-Field Propeller Noise
Issuing Committee:A-21 Aircraft Noise Measure Noise Aviation Emission Modeling
Scope: This high static thrust and relatively low installed engine power for propellers has been a factor in their consideration as propuslors for vertical and short take-off and landing (V/STOL) aircraft. The simplicity and low cost of the propeller has historically been a factor in its selection for the majority of general aviation aircraft. With the increased emphasis on noise generated by all types of aircraft there has been an increasing interest in controlling the noise of new V/STOL and conventional transport aircraft as well as general aviation aircraft. To assist the designer of new aircraft as well as others interested in the noise characteristics of various propeller configurations the procedure described in this Aerospace Information Report (AIR) has been developed.【英文标准名称】:Metallicpowders-Determinationofapparentdensity-Part1:Funnelmethod
【原文标准名称】:金属粉末.表观密度的测定.第1部分:漏斗法
【标准号】:ISO3923-1-2008
【标准状态】:现行
【国别】:国际
【发布日期】:2008-05
【实施或试行日期】:
【发布单位】:国际标准化组织(IX-ISO)
【起草单位】:ISO/TC119
【标准类型】:()
【标准水平】:()
【中文主题词】:表观密度;体密度;密度;密度测量;测定;漏斗;漏斗(实验室);金属粉末;粉末;粉末冶金;产品;试样;测试;体积
【英文主题词】:Apparentdensity;Bulkdensity;Density;Densitymeasurement;Determination;Funnels;Funnels(laboratory);Metallicpowders;Powder;Powdermetallurgy;Products;Samples;Testing;Testingdevices;Volume
【摘要】:ThispartofISO3923specifiesthefunnelmethodforthedeterminationoftheapparentdensityofmetallicpowdersunderstandardizedconditions.Themethodisintendedformetallicpowdersthatflowfreelythrougha2,5mmdiameterorifice.Itmay,however,beusedforpowdersthatflowwithdifficultythrougha2,5mmdiameterorificebutflowthrougha5mmdiameterorifice.Methodsforthedeterminationoftheapparentdensityofpowdersthatwillnotflowthrougha5mmdiameterorificearespecifiedinISO3923-2.
【中国标准分类号】:H16
【国际标准分类号】:77_160
【页数】:10P.;A4
【正文语种】:英语